This page can't be edited.

Connecting with an Ethernet cable instead of USB - no drivers required

From $1

    Table of contents
    You are currently comparing two old versions - only when you are comparing against the latest version can you revert. Return to version archive.

    Combined revision comparison

    Comparing version 16:16, 5 Jun 2018 by admin with version 16:31, 5 Jun 2018 by admin.

    ...

    • connect your laptop to the beaglebone's ethernet (network) port via ethernet cable
    • tell your laptop about the beaglebone's network by following these steps(:
    • go into Settings to get this window:

      windows_settings.png
       
    • choose Network & Internet to get this window:

      network_and_internet.png
       
    • choose "Change adapter options", and you will see this:

      choose_ethernet_properties.png
       
    • look for an adapter called "Ethernet X (Unidentified network" and right-click to select "Properties", to get this:

      choose_internet_protocol_version_4_properties.png
       
    • select "Internet Protocol Version 4 (TCP/IPv4) and then click Properties to get this:

      ip_v4_properties.png
       
    • choose "Use the following IP address" and fill in the IP address 192.168.9.1

    After hitting OK, you can open a web browser and enter this URL:

       http://192.168.9.2

    to connect to the sensorgnome web interface.

    Unfortunately, these steps will probably be required each time you wish to connect to the beaglebone SG.

    ...

    Downloading files to a Windows 10 laptop from a beaglebone-SG

    To download files, you will need these steps:

    • install Filezilla on your laptop
    • in FileZilla, connect like this:
    • your files can then be found in the /media/internal_SD_card/SGdata folder

    ...

    Version from 16:16, 5 Jun 2018

    This revision modified by admin (Ban)

    ...

    • connect your laptop to the beaglebone's ethernet (network) port via ethernet cable
    • tell your laptop about the beaglebone's network by following these steps:
    • go into Settings:
       

    Version as of 16:31, 5 Jun 2018

    This revision modified by admin (Ban)

    ...

    • connect your laptop to the beaglebone's ethernet (network) port via ethernet cable
    • tell your laptop about the beaglebone's network by following these steps(
    • go into Settings to get this window:

      windows_settings.png
       
    • choose Network & Internet to get this window:

      network_and_internet.png
       
    • choose "Change adapter options", and you will see this:

      choose_ethernet_properties.png
       
    • look for an adapter called "Ethernet X (Unidentified network" and right-click to select "Properties", to get this:

      choose_internet_protocol_version_4_properties.png
       
    • select "Internet Protocol Version 4 (TCP/IPv4) and then click Properties to get this:

      ip_v4_properties.png
       
    • choose "Use the following IP address" and fill in the IP address 192.168.9.1

    After hitting OK, you can open a web browser and enter this URL:

       http://192.168.9.2

    to connect to the sensorgnome web interface.

    Unfortunately, these steps will probably be required each time you wish to connect to the beaglebone SG.

    ...

    Downloading files to a Windows 10 laptop from a beaglebone-SG

    To download files, you will need these steps:

    • install Filezilla on your laptop
    • in FileZilla, connect like this:
    • your files can then be found in the /media/internal_SD_card/SGdata folder

    ...


     
    Powered by MindTouch Core