This page can't be edited.

Connecting with an Ethernet cable instead of USB - no drivers required

From $1

    Table of contents
    You are currently comparing two old versions - only when you are comparing against the latest version can you revert. Return to version archive.

    Combined revision comparison

    Comparing version 19:41, 5 Jun 2018 by admin with version 19:45, 5 Jun 2018 by admin.

    ...

    • connect your laptop to the beaglebone's ethernet (network) port via ethernet cable
    • tell your laptop about the beaglebone's network by following these steps (click on images to zoom)
    • go into Settings to get this window:

      windows_settings.png
       
    • choose Network & Internet to get this window:

      network_and_internet.png
       
    • choose "Change adapter options",, and you will see this:

      choose_ethernet_properties.png
       
    • look for an adapter called "Ethernet X (Unidentified network))" and right-click to select "Properties",, to get this:

      choose_internet_protocol_version_4_properties.png
       
    • select "Internet Protocol Version 4 (TCP/IPv4) and then click Properties to get this:

      ip_v4_properties.png
       
    • choose "Use the following IP address" and fill in the IP address 192.168.9.1192 . 168 . 9 . 1

    ...

    Version from 19:41, 5 Jun 2018

    This revision modified by admin (Ban)

    ...

    • connect your laptop to the beaglebone's ethernet (network) port via ethernet cable
    • tell your laptop about the beaglebone's network by following these steps (click on images to zoom)
    • go into Settings to get this window:

      windows_settings.png
       
    • choose Network & Internet to get this window:

      network_and_internet.png
       
    • choose "Change adapter options", and you will see this:

      choose_ethernet_properties.png
       
    • look for an adapter called "Ethernet X (Unidentified network)" and right-click to select "Properties", to get this:

      choose_internet_protocol_version_4_properties.png
       
    • select "Internet Protocol Version 4 (TCP/IPv4) and then click Properties to get this:

      ip_v4_properties.png
       
    • choose "Use the following IP address" and fill in the IP address 192.168.9.1

    ...

    Version as of 19:45, 5 Jun 2018

    This revision modified by admin (Ban)

    ...

    • connect your laptop to the beaglebone's ethernet (network) port via ethernet cable
    • tell your laptop about the beaglebone's network by following these steps (click on images to zoom)
    • go into Settings to get this window:

      windows_settings.png
       
    • choose Network & Internet to get this window:

      network_and_internet.png
       
    • choose Change adapter options, and you will see this:

      choose_ethernet_properties.png
       
    • look for an adapter called Ethernet X (Unidentified network) and right-click to select Properties, to get this:

      choose_internet_protocol_version_4_properties.png
       
    • select Internet Protocol Version 4 (TCP/IPv4) and then click Properties to get this:

      ip_v4_properties.png
       
    • choose Use the following IP address and fill in the IP address 192 . 168 . 9 . 1

    ...


     
    Powered by MindTouch Core